Additive Manufacturing Laboratory
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aliquam sit amet felis nec tellus volutpat egestas. Nunc aliquam est ante, a varius ex ultricies a. Ut vitae sem sapien. Quisque tincidunt pretium risus, non congue ipsum. Donec enim leo, imperdiet vitae tristique sed, semper non augue. Quisque eu lorem quis justo porttitor molestie. Vivamus eget ante et lectus tempor condimentum. Quisque sit amet aliquet tellus. Aliquam erat volutpat. Nulla non consequat justo. Cras volutpat vehicula turpis vitae rutrum. Cras accumsan tellus ut nibh sollicitudin dapibus. Vivamus lobortis eu quam et rutrum.
Software
As in other traditional manufacturing processes, a preliminary product design step is mandatory to generate a component using AM technologies. Thus, a CAD model of the part must be created.
Several programs are available for this purpose. At DIAM, we use Siemens NX as CAD software.
The CAD model is then converted in .stl file format.
Subsequently, the model is loaded in Magics. This software allows to set the printing environment by selecting the printer (i.e., building volume, gas flow direction and coater blade translation direction). So, the object can be placed in the most efficient way. If needed, supports can be generated.
At this stage, the job is almost ready to be processed, but a further step is fundamental: process parameters must be defined, such as laser path, layer thickness, hatch spacing etc. It is important to get the optimal parameters combination according to material requirements.
The process can be managed using EOSPRINT or SLIC3R for EOS systems and Sharebot, respectively.
POWDERS
ALLOYS AND PURE METALS
Alloys:
- 316L
- AlSi10Mg
- Stainless steel
- Ti64
- CuCrZr – under investigation
Pure metals:
- Ag – Silver
- Cu – Copper – under investigation
- Mo – Molibdenum
- Ta – Tantalum
- Ti – Titanium
- W -Tungsten – under investigation
Other characteristics…
MoreDMLS & SLM Printers
EOS M100
EOS M280
Sharebot MetalOne
EOS M100
The machine is equipped with a Yb fiber laser having a nominal power of 200 W and wavelength ranging from 900 to 1200 nm. The laser beam is focused to reach a spot diameter of 40 µm.
The atmosphere in the process chamber is composed by an inert gas (the oxygen content is typically lower than 0.1% during the printing process), which can be Ar or N2, with a maximum supply rate of 50 L/min.
The building volume measures 95 mm in height and 100 mm in diameter.
M100 is especially suitable for:
- Refractory metals
- Highly complex parts, thanks to the small laser spot
- Creating components for biomedical applications
EOS M280
This 3D metal printing system is provided with a 400 W Yb fiber laser, with a wavelength of 1060-1100 nm. The diameter of the focused beam is approximately 100-500 µm.
An inert gas (Ar or N2) is present in the building environment during the printing process. The maximum inert gas supply rate is 100 L/min.
The building area is a square with side 250 mm and the maximum building height is 325 mm.
M280 system is suitable for:
- Prototypes and parts with significant dimensions
- Material characterization
Sharebot MetalONE
This metal powder sintering printer uses a 250 W fiber laser with a wavelength of 1080 nm. The laser spot diameter is about 40 µm.
The printing process is performed under Ar or N2 atmosphere. The consumption of inert gas is 0.25 L/min.
The machine is suitable for building small parts: the building volume is 65x65x100 mm.